Dry-Wet Gas Scrubber for Industrial Acid Mist, Dust, and Waste Gas Treatment.

Product Description

Product Description

The spray tower is a kind of waste gas treatment equipment, which is often used in industrial waste gas treatment.
It is used to treat harmful components in the exhaust gas. The equipment used to clean the exhaust gas is also known as the spray tower and the water washing tower. The exhaust gas is introduced into the purification tower through the air pipe, and passes through the packing layer. The exhaust gas and the spray absorption liquid are in full contact with the gas-liquid two-phase to undergo an absorption and neutralization reaction. into the atmosphere. After being pressurized by the water pump at the bottom of the tower, the absorption liquid is sprayed down from the upper part of the tower through the spray pipe and spray head installed inside the tower, and then returned to the bottom of the tower for recycling. The purified exhaust gas meets the requirements of the local emission standards through the outlet pipe at the top of the tower, and reaches the discharge. The spray tower usually handles more acid mist exhaust gas, so it is also called acid mist exhaust gas tower.
It can also deal with ammonia (NH3) hydrogen sulfide waste gas, VOC organic waste gas, domestic garbage waste gas, waste combustion waste gas or dust.


 

Detailed Photos

 

Principle

When the dusty waste gas or oily waste gas passes through the spray tower body, the appropriate position (depending on the design) inside the tower body sprays liquid medium, some of which are lye and some of which are sulfuric acid solutions. If the waste gas contains acidity, choose lye spray to neutralize the acidity; if the waste gas contains alkalinity, choose sulfuric acid solution to absorb it. The specific choice of acid-base solution depends on the nature of the exhaust gas and the company's own conditions. Exhaust gas without acid and alkali but containing oil and dust can be treated by spraying with circulating aqueous solution. When the exhaust gas enters from the bottom of the tower body, it contacts the spray medium sprayed from the spray tower. After contact, the exhaust gas or oil pollution is wrapped by water droplets, and the water droplets wrapped in pollutants collide again with an increased surface area and increased gravity. When the gravity increases, the water droplets that wrap the pollutants fall into the bottom of the spray tower under the influence of gravity, the heavier pollutants sink to the bottom of the tower, and the lighter pollutants float on the surface of the circulating water body.

Applications

Generally, the spray tower is used for industrial dust removal or waste gas treatment.
The working principle of the spray tower is mainly composed of filters, multi-stage sprays, drippers, collection chambers and other components.
It is mainly used for the pretreatment of harmful waste gas and viscous gas. It can effectively separate the solids in the gas. The spray tower is the main equipment for boiler flue gas wet desulfurization with limestone.
Limestone or limestone powder is used as absorbent, and limestone blocks or limestone powder are made into limestone slurry. The limestone slurry is pumped into the absorption tower to fully contact with the flue gas, so that SO2 in the flue gas reacts with CaCO3 in the slurry to form CaSO4.
Air is blown in from the slurry pool at the lower part of the absorption tower to oxidize CaSO3 to CaSO4. After CaSO4 reaches a certain saturation, it crystallizes to form CaSO4•2H2O.
The gypsum slurry discharged from the absorption tower is concentrated and dehydrated to make its water content less than 10%, and then sent to the gypsum room for stacking by conveyor. After the desulfurized flue gas passes through the demister to remove the mist droplets, it is discharged into the atmosphere through the chimney.

 

Our Advantages

1. High dust removal and desulfurization efficiency. There is no filler or tray in the tower, but it is an absorption tower with nozzles. The liquid enters from the top of the tower and is sprayed into mist or raindrops through the nozzle; the gas enters from the lower part of the tower and is in close contact with the mist or raindrops for mass transfer. So that the soluble components in the gas are absorbed. Simple structure, not easy to be blocked, small resistance, convenient operation and maintenance. When using alkaline washing water, the desulfurization efficiency can reach 85%.

2. The spray tower is the simplest equipment for gas absorption. In the spray tower, the liquid is a dispersed phase, and the gas is a continuous phase. Generally, the gas-liquid ratio is small, and it is suitable for the absorption process of extremely fast or fast chemical reactions. The equipment occupies a small space and is easy to install;

3. Low water consumption and electricity consumption index,

4. Spray tower The spray tower (spray tower) tower is the simplest equipment for gas absorption. In the spray tower, the liquid is a dispersed phase, and the gas is a continuous phase. Generally, the gas-liquid ratio is small, and it is suitable for extremely fast or fast chemical The absorption process of the reaction. Corrosion resistance, no wear, long service life;

 

Product Parameters

Gas Scrubber Parameters
Air volume(M3/H)	Size(mm)	THK(MM)	Drain outlet(mm)	Water tank size(mm)	Inlet/outlet size(mm)	Pump(kw)	Wind resistance
3000	800	8	DN32	600*700*H700	315	0.75KW	500pa
5000	1000	8	DN40	600*800*H700	400	1.5KW	500pa
8000	1200	8	DN40	600*1000*H700	500	2.2KW	500pa
10000	1500	10	DN40	700*1000*H700	550	2.2KW	500pa
12000	1600	10	DN50	700*1000*H700	600	3.75KW	500pa
15000	1800	10	DN50	700*1200*H700	650	3.75KW	500pa
20000	2000	10	DN50	700*1200*H700	750	5.5KW	500pa
25000	2200	10	DN50	700*1200*H700	950	5.5KW	500pa
30000	2500	12	DN65	700*1200*H700	1000	5.5KW	500pa
35000	2700	12	DN65	1000*700*H700	1100	7.5KW	500pa
40000	2900	12	DN65	1000*700*H700	1200	7.5KW	500pa
45000	3000	12	DN65	1000*700*H700	1250	7.5KW	500pa

 

FAQ

Q1. What is your terms of packing?
A: Generally, we pack our goods in Iron frame packing and Carton packing.

Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and
packages before you pay the balance.

Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.

Q4. How about your delivery time?
A: Generally, it will take 10 to 15 days after receiving your advance payment. The specific delivery
time depends on the items and the quantity of your order.

Q5. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery

Q6: How do you make our business long-term and good relationship?
1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends